Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION: Be sure to read Precaution thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE FRONT SEAT HEADREST ASSEMBLY (w/o Seatback Board)
4. REMOVE OUTER SEAT TRACK COVER (w/o Seatback Board) Removal
5. REMOVE INNER SEAT TRACK COVER (w/o Seatback Board) Removal
6. REMOVE FRONT SEAT ASSEMBLY (w/o Seatback Board) Removal
7. REMOVE FRONT SEAT HEADREST ASSEMBLY (w/ Seatback Board)
8. REMOVE OUTER SEAT TRACK COVER RH (w/ Seatback Board) Removal
9. REMOVE INNER SEAT TRACK COVER RH (w/ Seatback Board)
for 2WD: Removal
for 4WD: Removal
10. REMOVE FRONT SEAT ASSEMBLY RH (w/ Seatback Board) Removal
11. REMOVE RECLINING ADJUSTER RELEASE HANDLE (w/o Seatback Board) Disassembly
12. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (w/o Seatback Board) Disassembly
13. REMOVE VERTICAL ADJUSTING HANDLE (w/o Seatback Board) Disassembly
14. REMOVE FRONT SEAT CUSHION SHIELD (w/o Seatback Board) Disassembly
15. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (w/ Seatback Board) Disassembly
16. REMOVE FRONT SEAT CUSHION SHIELD RH (w/ Seatback Board) Disassembly
17. REMOVE SEAT POSITION SENSOR

(a) Disconnect the connector.
NOTE: When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.