Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING RECEIVER: INSTALLATION

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER





(a) Connect the connector.





(b) Install the tire pressure warning antenna and receiver with the bolt.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
HINT: Engage the 2 tabs into the holes as shown in the illustration to install the tire pressure warning antenna and receiver.

2. INSTALL ROOF SIDE INNER GARNISH LH Installation
3. INSTALL QUARTER PILLAR GARNISH LH Installation
4. INSTALL SIDE DECK TRIM PANEL ASSEMBLY LH Installation
5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation
6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side) Installation
7. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) Installation
8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Installation
9. INSTALL REAR SEAT SIDE GARNISH LH Installation
10. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side) Installation
11. INSTALL REAR DECK TRIM COVER Installation
12. INSTALL LUGGAGE COMPARTMENT TRAY Installation
13. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR Installation
14. INSTALL DECK FLOOR BOX RH Installation
15. INSTALL DECK FLOOR BOX LH Installation
16. INSTALL JACK ASSEMBLY Installation
17. INSTALL JACK CARRIER ASSEMBLY
18. INSTALL NO. 2 DECK BOARD Installation
19. INSTALL DECK BOARD ASSEMBLY Installation
20. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
21. INSTALL REAR SEATBACK ASSEMBLY LH Installation
22. INSTALL REAR SEATBACK INNER HINGE COVER (for LH Side) Installation
23. INSTALL REAR SEATBACK OUTER HINGE COVER (for LH Side) Installation
24. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)
25. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
26. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation
27. INSTALL REAR DOOR SCUFF PLATE LH Installation
28. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
29. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: Test Mode Procedure.