Fail-Safe Chart

MF1A TRANSFER / 4WD / AWD: ACTIVE TORQUE CONTROL 4WD SYSTEM: FAIL-SAFE CHART

FAIL-SAFE CHART

1. FAIL-SAFE FUNCTION

- If the following malfunctions occur, the 4WD control ECU will stop the function of 4WD control system or partly change the function to control the system.

- If a malfunction occurs in the sensor signal or actuator, the flow of electricity to the linear solenoid of the electromagnetic control coupling is prohibited. As a result, the system enters front wheel drive condition.

- When a component of the system malfunctions and the fail-safe function activate, the component operation is prohibited. However, if the system is controlling the component and the fail-safe function activates, the system operation is gradually stopped to prevent sudden changes in the vehicle condition.

- When system control is not possible, the warning light is illuminated to stop operation of the system operation.