Installation

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR (w/ VSC): INSTALLATION

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR





(a) Align the 2 locating pins, engage the 6 claws, and install the steering angle sensor to the spiral cable.
2. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation
3. INSTALL UPPER STEERING COLUMN COVER Installation
4. INSTALL LOWER STEERING COLUMN COVER Installation
5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
6. INSTALL NO. 1 SWITCH HOLE BASE Installation
7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Installation
8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Installation
9. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation
10. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation
11. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
12. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation
13. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 2WD) Installation
14. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 4WD) Installation
15. INSTALL CONSOLE BOX CARPET
16. INSTALL NO. 2 SWITCH BASE Installation
17. INSTALL FRONT UPPER CONSOLE BOX Installation
18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation
19. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation
20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation
21. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation
22. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
23. ADJUST SPIRAL CABLE Installation
24. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
25. INSTALL STEERING WHEEL ASSEMBLY Installation
26. INSPECT STEERING WHEEL CENTER POINT
27. INSTALL STEERING PAD Installation
28. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
29. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
30. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When reconnecting the cable to the negative (-) battery terminal after installing the steering sensor, check that the front tires and steering wheel are kept aligned straight ahead before and after connecting the cable to the negative (-) battery terminal.

31. INSPECT STEERING PAD Installation
32. INSPECT SRS WARNING LIGHT Diagnosis System