Installation

C59 MANUAL TRANSMISSION / TRANSAXLE: BACK-UP LIGHT SWITCH: INSTALLATION

INSTALLATION

1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY





(a) Using SST, install the back-up light switch and a new gasket to the transaxle case.
SST: 09817-16011
Torque: 40 Nm (410 kgf-cm, 30 ft-lbf)





(b) Install the 2 clamps.
NOTE: Be sure to use boss B.

(c) Connect the back-up light switch connector.
2. CONNECT TRANSMISSION CONTROL SHIFT CABLE





(a) Connect the transmission control shift cable with the clip*1.
(b) Connect the transmission control shift cable with a new clip*2.
3. INSTALL AIR CLEANER CASE Installation
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation
5. INSTALL NO. 2 CYLINDER HEAD COVER Installation