Installation

U341E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION

INSTALLATION

1. INSTALL TRANSMISSION WIRE





(a) Coat a new O-ring with ATF WS and install it to the transmission wire.





(b) Pass the transmission wire through the transaxle.





(c) Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY Installation
5. INSTALL BATTERY CARRIER Installation
6. INSTALL BATTERY Installation
7. ADD AUTOMATIC TRANSAXLE FLUID
8. INSPECT AUTOMATIC TRANSAXLE FLUID Procedures
9. INSTALL ENGINE UNDER COVER LH