Removal

DOOR LOCK: REAR DOOR LOCK: REMOVAL

REMOVAL

1. REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) Disassembly
2. REMOVE REAR DOOR INSIDE HANDLE BEZEL Disassembly
3. REMOVE REAR DOOR ARMREST UPPER BASE PANEL (w/o Power Window) Disassembly
4. REMOVE REAR DOOR ARMREST UPPER BASE PANEL (w/ Power Window) Disassembly
5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY Disassembly
6. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY Disassembly
7. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP Disassembly
8. REMOVE REAR DOOR SERVICE HOLE COVER (w/o Power Door Lock) Disassembly
9. REMOVE REAR DOOR SERVICE HOLE COVER (w/ Power Door Lock) Disassembly
10. REMOVE REAR DOOR GLASS RUN Disassembly
11. REMOVE REAR DOOR REAR WINDOW GUIDE SUB-ASSEMBLY Disassembly
12. REMOVE REAR DOOR REAR GUIDE SEAL Disassembly
13. REMOVE REAR DOOR GLASS SUB-ASSEMBLY Disassembly
14. REMOVE REAR DOOR LOCK ASSEMBLY (w/o Power Door Lock)





(a) Using a "TORX" socket wrench (T30), remove the 3 screws.
(b) Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
15. REMOVE REAR DOOR LOCK ASSEMBLY (w/ Power Door Lock)





(a) Using a "TORX" socket wrench (T30), remove the 3 screws.
(b) Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
(c) Remove the door lock wiring harness seal from the rear door lock assembly.
16. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/o Power Door Lock)





(a) Remove the rear door lock remote control cable assembly.
17. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/ Power Door Lock)





(a) Using a screwdriver, disengage the claw.
HINT: Tape the screwdriver tip before use.





(b) Remove the rear door lock remote control cable assembly.
18. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY (w/o Power Door Lock)





(a) Remove the rear door inside locking cable assembly.
19. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY (w/ Power Door Lock)





(a) Using a screwdriver, disengage the 3 claws.
HINT: Tape the screwdriver tip before use.





(b) Remove the rear door inside locking cable assembly.