Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR (w/ VSC): REMOVAL

REMOVAL

1. PRECAUTION Service Precautions
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from negative (-) battery terminal to disable the SRS system.

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
6. REMOVE STEERING PAD Removal
7. REMOVE STEERING WHEEL ASSEMBLY Removal
8. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal
10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal
11. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal
12. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal
13. REMOVE FRONT UPPER CONSOLE BOX Removal
14. REMOVE NO. 2 SWITCH BASE Removal
15. REMOVE CONSOLE BOX CARPET
16. REMOVE FRONT CONSOLE BOX ASSEMBLY (for 2WD) Removal
17. REMOVE FRONT CONSOLE BOX ASSEMBLY (for 4WD) Removal
18. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal
19. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
20. REMOVE FRONT NO. 1 CONSOLE BOX INSERT Removal
21. REMOVE FRONT NO. 2 CONSOLE BOX INSERT Removal
22. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Removal
23. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Removal
24. REMOVE NO. 1 SWITCH HOLE BASE Removal
25. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
26. REMOVE LOWER STEERING COLUMN COVER Removal
27. REMOVE UPPER STEERING COLUMN COVER Removal
28. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR Removal
29. REMOVE STEERING ANGLE SENSOR





(a) Disengage the 6 claws and 2 pins, and remove the steering angle sensor from the spiral cable.