Removal

LIGHTING (EXT): AUTOMATIC LIGHT CONTROL SENSOR: REMOVAL

REMOVAL

1. PRECAUTION Upper Instrument Panel
2. POSITION FRONT WHEELS STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
6. REMOVE STEERING PAD Removal
7. REMOVE STEERING WHEEL ASSEMBLY Removal
8. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
9. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
10. REMOVE METER HOOD SUB-ASSEMBLY Removal
11. REMOVE COMBINATION METER ASSEMBLY Removal
12. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal
13. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Removal
14. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Removal
15. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal
16. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag) Removal
17. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag) Removal
18. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal
19. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Multi-Mode Manual Transaxle) Removal
20. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal
21. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal
22. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal
23. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
24. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Removal
25. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY Removal
26. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal
27. REMOVE AUTOMATIC LIGHT CONTROL SENSOR





(a) Disconnect the connector.
(b) Disengage the 2 claws and remove the automatic light control sensor.