Installation

DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION

INSTALLATION

1. INSTALL DOOR CONTROL RECEIVER





(a) Install the door control receiver with the bolt.
(b) Connect the connector.
2. INSTALL ROOF SIDE INNER GARNISH RH
HINT: Use the same procedure for the RH side and LH side Installation.

3. INSTALL QUARTER PILLAR GARNISH RH
HINT: Use the same procedure for the RH side and LH side Installation.

4. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH (w/o Woofer) Installation
5. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH (w/ Woofer) Installation
6. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH (w/ Woofer) Installation
7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)
HINT: Use the same procedure for the RH side and LH side Installation.

8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)
HINT: Use the same procedure for the RH side and LH side Installation.

9. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Installation
10. INSTALL REAR SEAT SIDE GARNISH RH Installation
11. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side) Installation
12. INSTALL REAR DECK TRIM COVER Installation
13. INSTALL LUGGAGE COMPARTMENT TRAY Installation
14. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR Installation
15. INSTALL DECK FLOOR BOX RH Installation
16. INSTALL DECK FLOOR BOX LH Installation
17. INSTALL JACK ASSEMBLY Installation
18. INSTALL JACK CARRIER ASSEMBLY
19. INSTALL NO. 2 DECK BOARD Installation
20. INSTALL DECK BOARD ASSEMBLY Installation
21. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
22. INSTALL REAR SEATBACK ASSEMBLY RH Installation
23. INSTALL REAR SEATBACK INNER HINGE COVER (for RH Side) Installation
24. INSTALL REAR SEATBACK OUTER HINGE COVER (for RH Side) Installation
25. CONNECT REAR SEAT CENTER OUTER BELT ASSEMBLY Installation
26. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
27. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)
28. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
29. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation
30. INSTALL REAR DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side Installation.