Removal

WIPER / WASHER: WIPER SWITCH: REMOVAL

REMOVAL

1. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
5. REMOVE STEERING PAD Removal
6. REMOVE STEERING WHEEL ASSEMBLY Removal
7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
8. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
9. REMOVE METER HOOD SUB-ASSEMBLY Removal
10. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal
11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal
12. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Removal
13. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Removal
14. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Removal
15. REMOVE FRONT UPPER CONSOLE BOX Removal
16. REMOVE NO. 2 SWITCH HOLE BASE Removal
17. REMOVE CONSOLE BOX CARPET
18. REMOVE FRONT CONSOLE BOX ASSEMBLY (for 2WD) Removal
19. REMOVE FRONT CONSOLE BOX ASSEMBLY (for 4WD) Removal
20. REMOVE FRONT NO. 1 CONSOLE BOX INSERT Removal
21. REMOVE FRONT NO. 2 CONSOLE BOX INSERT Removal
22. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Removal
23. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Removal
24. REMOVE NO. 1 SWITCH HOLE BASE Removal
25. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
26. REMOVE LOWER STEERING COLUMN COVER Removal
27. REMOVE UPPER STEERING COLUMN COVER Removal
28. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY





(a) Disconnect the 2 connectors.
(b) Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.
NOTE: If the claw is pushed with excessive force, it may break.