Installation

STEERING COLUMN: STEERING WHEEL: INSTALLATION

INSTALLATION

1. INSTALL STEERING WHEEL PAD ATTACHING SCREW





(a) Install the 2 steering wheel pad attaching screws to the lower steering wheel boss cover.
2. INSTALL LOWER STEERING WHEEL BOSS COVER





(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.





(b) Install the 2 screws.
3. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) Installation
4. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Navigation System) Installation
5. INSTALL STEERING PAD SWITCH LH (w/ Steering Pad Switch) Installation
6. INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/ Steering Pad Switch)





(a) Engage the 2 pins to install the No. 1 steering wheel ornament to the steering wheel sub-assembly.





(b) Install the screw.
7. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
8. ADJUST SPIRAL CABLE Installation
9. INSTALL STEERING WHEEL ASSEMBLY





(a) Align the matchmarks on the steering wheel assembly and steering main shaft.
(b) Install the steering wheel assembly set nut.
Torque: 50 Nm (510 kgf-cm, 37 ft-lbf)
(c) Connect the connectors to the spiral cable sub-assembly.
10. INSTALL STEERING PAD Installation
11. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
12. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
13. INSPECT STEERING WHEEL CENTER POINT
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
15. INSPECT STEERING PAD Installation
16. INSPECT SRS WARNING LIGHT
HINT: Diagnosis System.