C2176

TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2176/76: Receiver Error

DTC C2176/76 - Receiver Error

DESCRIPTION

When the tire pressure warning ECU is detected to ECU internal error, DTC C2176/76 is stored.






INSPECTION PROCEDURE
NOTICE:
- When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using the Techstream and write them down before removal.
- It is necessary to perform initialization Initialization after registration Registration of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.

PROCEDURE

1. CHECK DTC (C2176/76)
(a) Clear the DTC Reading and Clearing Diagnostic Trouble Codes.
(b) Turn the power switch off.
(c) Turn the power switch on (IG) and check for DTC Reading and Clearing Diagnostic Trouble Codes.
OK:
DTC C2176/76 is not output.
NG -- REPLACE TIRE PRESSURE WARNING ECU
OK -- END