Linear Solenoid Valve Offset Malfunction - Electronically Controlled Brake System

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1345/66: Linear Solenoid Valve Offset Learning Undone

DTC C1345/66 - Linear Solenoid Valve Offset Learning Undone

DTC C1368/67 - Linear Solenoid Valve Offset Malfunction

DESCRIPTION

The skid control ECU stores and corrects the difference in each individual part such as the stroke sensor, actuator solenoids, and stroke simulator solenoid. Perform "initialization of linear solenoid valve and calibration" if these parts are replaced.
The skid control ECU inputs the shift position P signal.






INSPECTION PROCEDURE

PROCEDURE

1. PERFORM INITIALIZATION OD LINEAR SOLENOID VALVE AND CALIBRATION
(a) Perform "initialization of linear solenoid valve and calibration" Initialization.
NEXT -- Continue to next step.

2. RECONFIRM DTC
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(b) Turn the power switch ON (READY).
(c) Check the same DTCs are recorded Reading and Clearing Diagnostic Trouble Codes.

Result





B -- REPLACE BRAKE ACTUATOR ASSEMBLY
A -- END