Installation

AUDIO / VISUAL: RADIO ANTENNA CORD: INSTALLATION

INSTALLATION

1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY
(a) Attach the 3 clamps and 2 claws to install the antenna cord.
(b) Connect the connector.





2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(a) Install the instrument panel Installation.
3. INSTALL ANTENNA CORD SUB-ASSEMBLY
(a) Attach the 10 clamps. Install the antenna cord with the bolt.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)
(b) Connect the connector.





4. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining Installation.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.