Initial Inspection and Diagnostic Overview

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT: Use theses procedures to troubleshoot the rear view monitor system.

1. VEHICLE BROUGHT WORKSHOP
NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.

3. CHECK CAMERA LENS
(a) Check that the camera lens is not dirty with mud, foreign matter, etc.
NEXT -- Continue to next step.

4. BASIC INSPECTION
(a) Turn the power switch ON (ACC).
(b) Check whether or not the display appears on the multi-display.

Result





B -- Go to NAVIGATION SYSTEM
A -- Continue to next step.

5. PROBLEM SYMPTOMS TABLE

Result





B -- Go to step 7
A -- Continue to next step.

6. OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Terminals of ECU Pinout Values and Diagnostic Parameters
NEXT -- Continue to next step.

7. ADJUST, REPAIR OR REPLACE
NEXT -- END