Rear Door Speaker

AUDIO / VISUAL: REAR DOOR SPEAKER: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT REAR NO. 1 SPEAKER
HINT: Remove interior parts so that the rear No. 1 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the rear No. 1 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the rear No. 1 speaker.
(c) Speaker resistance check




(1) Disconnect the rear No. 1 speaker connector.
(2) Measure the resistance between the terminals of the speaker.
Standard resistance:






If the result is not as specified, replace the rear No. 1 speaker.
2. INSPECT REAR NO. 2 SPEAKER
HINT: Remove interior parts so that the rear No. 2 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the rear No. 2 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the rear No. 2 speaker.