Installation

INTERIOR: FUEL LID LOCK CONTROL: INSTALLATION

INSTALLATION

1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER





(a) Install the lock retainer and turn it clockwise as shown in the illustration.
2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY





(a) Attach the claw and install the cable to the lock retainer.
(b) Connect the cable from the clamps at the location shown in the illustration.





3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
(a) Connect the cable to the lever.





(b) Install the lever with the screw.
4. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH Installation
5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH Installation
6. INSTALL CENTER PILLAR LOWER GARNISH LH Installation
7. INSTALL REAR DOOR SCUFF PLATE LH Installation
8. INSTALL FRONT DOOR SCUFF PLATE LH Installation
9. INSTALL REAR SIDE SEATBACK ASSEMBLY LH Installation
10. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
11. INSTALL FRONT SEAT ASSEMBLY LH
(a) Install the seat Installation.
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.