Installation

BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL YAW RATE SENSOR





(a) Install the sensor with the 2 bolts.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
(b) Connect the sensor connector.
2. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY Installation
3. INSTALL CONSOLE BOX CARPET
4. INSTALL CONSOLE BOX POCKET
5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
6. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION
(a) Perform the yaw rate sensor zero point calibration Calibration.
7. CHECK AND CLEAR DTC
(a) Check and clear the DTC Reading and Clearing Diagnostic Trouble Codes.