Removal

BRAKE CONTROL: STEERING ANGLE SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 2 STEERING WHEEL COVER LOWER
3. REMOVE NO. 3 STEERING WHEEL COVER LOWER
4. REMOVE STEERING PAD ASSEMBLY Removal
5. REMOVE STEERING WHEEL ASSEMBLY Removal
6. REMOVE TILT LEVER BRACKET Removal
7. REMOVE STEERING COLUMN COVER Removal
8. REMOVE SPIRAL CABLE SUB-ASSEMBLY Removal
9. REMOVE STEERING ANGLE SENSOR





(a) Detach the 6 claws and remove the sensor from the spiral cable.