Cruise Control: Service Precautions

CRUISE CONTROL: CRUISE CONTROL SYSTEM: PRECAUTION

PRECAUTION

1. NOTICE FOR INITIALIZATION
NOTE: When the cable of the negative (-) battery terminal is disconnected, initialize the following system(s) after the cable is reconnected.





2. NOTICE FOR HYBRID SYSTEM ACTIVATION
NOTICE:
- When the warning light is illuminated or the battery has been disconnected and reconnected, pressing the power switch may not start the system on the first try. If so, press the power switch again.
- With the power switch's power mode changed to ON (IG), disconnect the battery. If the key is not in the key slot during reconnection, DTC B2799 may be output.

3. NOTICE FOR CRUISE CONTROL SYSTEM
NOTE: Push the cruise control main switch ON-OFF button "off" and reset the cruise control if the CRUISE main indicator light blinks while driving with cruise control. When the cruise control cannot be set by this procedure or canceled immediately after setting, there may be a problem in the cruise control system.

Do not inspect the cruise control system under the following road conditions:

- Heavy traffic
- Steep downhill
- Sharp turns
- Icy or snowy roads
- Slippery roads