Installation

1NZ-FXE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

INSTALLATION

1. INSTALL DRIVE BELT
(a) Temporarily install the belt on each pulley.
2. ADJUST DRIVE BELT TENSION





(a) Turn adjust bolt B to adjust the belt tension.
(b) Tighten nut A.
Torque: 40 Nm (408 kgf-cm, 30 ft-lbf)
3. CHECK DRIVE BELT TENSION Testing and Inspection
4. CONNECT NO. 1 AIR CLEANER INLET





(a) Connect the air cleaner inlet to the air cleaner case and tighten the clamp.
Torque: 3.0 Nm (31 kgf-cm, 27 in-lbf)
5. INSTALL ENGINE UNDER COVER RH