Oil Pump: Specifications

OIL PUMP ASSEMBLY





Install the oil pump assembly with the 15 bolts and nut. Uniformly tighten the bolts and nut in several steps.

Torque 32 Nm (326 kgf-cm, 24 ft-lbf)
Torque 11 Nm (112 kgf-cm, 8.1 ft-lbf)
Torque 11 Nm (112 kgf-cm, 8.1 ft-lbf)
Torque 24 Nm (245 kgf-cm, 18 ft-lbf)
Torque 24 Nm (245 kgf-cm, 18 ft-lbf)


Each bolt length is as follows:
30 mm (1.18 in.) for bolt A
35 mm (1.38 in.) for bolt B
20 mm (0.79 in.) for bolt C
20 to 14 mm (0.79 to 0.55 in.) for bolt E

NOTICE:
- Be careful not to disturb the seal packing.
- After installing the timing chain case, install the mounting bracket and water pump within 15 minutes.

OIL PUMP COVER





Install the oil pump cover with the 2 bolts and 3 screws.
Torque 8.8 Nm (90 kgf-cm, 78 in-lbf)
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)