Installation

LIGHTING: HEADLIGHT DIMMER SWITCH: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Insert the headlight dimmer switch assembly so that its recessed portion matches that of the steering column shaft.





(b) Install the headlight dimmer switch with the band clamp and claw.
(c) Connect the connectors.
2. INSTALL WIPER AND WASHER SWITCH ASSEMBLY Removal
3. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation
4. INSTALL STEERING COLUMN COVER Installation
5. ADJUST SPIRAL CABLE SUB-ASSEMBLY Installation
6. INSPECT STEERING WHEEL CENTER POINT
7. INSTALL STEERING WHEEL ASSEMBLY Installation
8. INSTALL STEERING PAD ASSEMBLY Installation
9. INSTALL NO. 3 STEERING WHEEL COVER LOWER
10. INSTALL NO. 2 STEERING WHEEL COVER LOWER
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSPECT STEERING PAD ASSEMBLY Installation
13. CHECK SRS WARNING LIGHT Installation
14. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.