Removal

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH and LH sides.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH
3. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH





(a) Remove the 2 nuts.
(b) Slide the 2 pins towards the back of the vehicle to remove them.
(c) Disconnect the connector and remove the rear combination light.
(d) Remove the 3 bulb sockets and 3 bulbs from the rear combination light.