Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY UPPER Removal
5. REMOVE NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
6. REMOVE NO.4 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
7. REMOVE NO.2 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
8. REMOVE MULTI-DISPLAY ASSEMBLY
(a) Remove the multi-display Removal.





9. REMOVE TIRE PRESSURE WARNING ECU
(a) Disconnect the connector.
(b) Remove the bolt and ECU.