Removal

AXLE: FRONT AXLE HUB BOLT: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL
2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH Removal
3. REMOVE FRONT DISC
HINT: Put matchmarks on the front disc and front axle hub.

4. REMOVE FRONT AXLE HUB BOLT LH
(a) Temporarily install 2 nuts to any 2 hub bolts, except the hub bolt that you will replace.





(b) Using SST and a screwdriver or equivalent to hold the front axle, remove the hub bolt that needs to be replaced.
SST: 09611-12010