Installation

1NZ-FXE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

INSTALLATION





1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Using a 19 mm deep socket wrench, install a new gasket and the sensor.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Connect the sensor connector.
2. INSTALL INVERTER WITH CONVERTER
(a) Install the inverter with converter Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. ADD ENGINE COOLANT Testing and Inspection
5. ADD HV COOLANT Coolant (for Inverter)
6. INSPECT FOR COOLANT LEAK (for Engine) Testing and Inspection
7. INSPECT FOR COOLANT LEAK (for Inverter)
8. INSTALL ENGINE UNDER COVER RH
9. INSTALL ENGINE UNDER COVER LH
10. INSTALL RADIATOR SUPPORT OPENING COVER Installation
11. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.