Removal

1NZ-FXE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: REMOVAL

REMOVAL

1. REMOVE RADIATOR SUPPORT OPENING COVER Removal
2. REMOVE ENGINE UNDER COVER LH
3. REMOVE ENGINE UNDER COVER RH
4. DRAIN ENGINE COOLANT Testing and Inspection
5. DRAIN HV COOLANT Coolant (for Inverter)
6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

7. REMOVE INVERTER WITH CONVERTER
(a) Remove the inverter with converter Removal.
8. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.