Camshaft Bearing Cap Torque and Sequence

CAMSHAFT





Turn the crankshaft by 40° counterclockwise from TDC/compression.





Apply a light coat of engine oil to the camshaft journals.
Place the camshaft on the cylinder head with the timing mark on the camshaft timing gear facing upward.
Examine the front marks and numbers, and tighten the bolts in the sequence shown in the illustration.
Torque: 13 Nm (129 kgf-cm, 9 ft-lbf)

NOTE: Tighten each bolt uniformly, keeping the camshaft level.

NO. 2 CAMSHAFT





Apply a light coat of engine oil to the camshaft journals.
Place the camshaft on the cylinder head with the timing mark on the camshaft timing gear facing upward.
Examine the front marks and numbers, and tighten the bolts in the sequence shown in the illustration.
Torque: 13 Nm (133 kgf-cm, 9 ft-lbf)

NOTE: Tighten each bolt uniformly, keeping the camshaft level.

Install the No. 1 bearing cap.
Torque: 23 Nm (235 kgf-cm, 17 ft-lbf)