Removal

AXLE: REAR AXLE HUB BOLT: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL
2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
HINT: Put matchmarks on the brake drum and hub.

3. REMOVE REAR AXLE HUB BOLT LH
(a) Temporarily install 2 nuts to any 2 hub bolts, except hub bolt that you will replace.





(b) Using SST and a screwdriver or equivalent to hold the front axle, remove the hub bolt that needs to be replaced.
SST: 09611-12010