Removal

WIPER AND WASHER: WIPER SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE NO. 2 STEERING WHEEL COVER LOWER
3. REMOVE NO. 3 STEERING WHEEL COVER LOWER
4. REMOVE STEERING PAD ASSEMBLY Removal
5. REMOVE STEERING WHEEL ASSEMBLY Removal
6. REMOVE TILT LEVER BRACKET Removal
7. REMOVE STEERING COLUMN COVER Removal
8. REMOVE WIPER AND WASHER SWITCH ASSEMBLY





(a) Disconnect the connector.
(b) Push and disengage the claw shown in the illustration and remove the windshield wiper switch.
NOTE: The claw will be broken if pressed too hard.