Installation

WIPER AND WASHER: WIPER SWITCH: INSTALLATION

INSTALLATION





1. INSTALL WIPER AND WASHER SWITCH
(a) Attach the claw to install the wiper switch.
(b) Connect the connector.
2. INSTALL STEERING COLUMN COVER Installation
3. INSTALL TILT LEVER BRACKET Installation
4. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation
5. INSTALL STEERING WHEEL ASSEMBLY Installation
6. INSTALL NO. 2 STEERING WHEEL COVER LOWER
7. REMOVE NO. 3 STEERING WHEEL COVER LOWER
8. INSTALL STEERING PAD ASSEMBLY Installation
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSPECT STEERING PAD ASSEMBLY Installation
11. CHECK SRS WARNING LIGHT Installation
12. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.