Removal

FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL

REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)
HINT: Refer to the procedure up to Remove Engine Assembly with Transaxle Removal.

2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)
HINT: Refer to the procedure up to Remove Engine Assembly with Transaxle Removal.

3. REMOVE FRONT NO. 1 STABILIZER BRACKET LH Removal
4. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT: Perform the same procedure as the LH side.

5. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
6. REMOVE STEERING LINK ASSEMBLY Removal
7. DISCONNECT FRONT FRAME ASSEMBLY (for 2GR-FE) Removal
8. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) Removal
9. REMOVE ENGINE MOUNTING INSULATOR LH (for 2GR-FE) Removal
10. REMOVE ENGINE MOUNTING INSULATOR RH (for 2GR-FE) Removal
11. REMOVE REAR ENGINE MOUNTING INSULATOR (for 2GR-FE) Removal
12. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE) Removal
13. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) Removal
14. REMOVE ENGINE MOUNTING INSULATOR LH (for 1AR-FE) Removal
15. REMOVE ENGINE MOUNTING INSULATOR RH (for 1AR-FE) Removal
16. REMOVE REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) Removal
17. REMOVE FRONT LOWER SUSPENSION ARM LH Removal
18. REMOVE FRONT LOWER SUSPENSION ARM RH
HINT: Perform the same procedure as the LH side.

19. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for 2WD)





(a) Remove the 2 bolts and front suspension member dynamic damper.
20. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER
21. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER
22. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION





(a) Install SST as shown in the illustration.

Text in Illustration





SST: 09830-10010
09830-01010
09830-01040
09830-01050
SST: 09950-40011
09951-04020
09952-04010
09955-04011





(b) Using SST, remove the front suspension member body mounting front cushion.

Text in Illustration





NOTICE:
- Make sure that the claws of SST are securely hung onto the mounting front cushion.
- Tighten SST slowly and evenly.
- Be careful as the mounting front cushion may fly out.
- The mounting front cushion cannot be reused.

23. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH





(a) Install SST as shown in the illustration.
SST: 09830-10010
09830-01010
09830-01040
09830-01050
SST: 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011

Text in Illustration









(b) Using SST, remove the front suspension member body mounting rear cushion LH.

Text in Illustration





SST: 09830-10010
09830-01010
09830-01040
09830-01050
SST: 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011

NOTICE:
- Make sure that the claws of SST are securely hung onto the mounting rear cushion.
- Tighten SST slowly and evenly.
- Be careful as the mounting rear cushion may fly out.
- The mounting rear cushion cannot be reused.

24. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
HINT: Perform the same procedure as the LH side.