Canada - Audio/Interior - Center Speaker Cover Lifting

Bulletin
TSB3380

Issue Date
March 25, 2010

Market
Canada

Title
CENTER SPEAKER COVER LIFTING

Component
BODY COMPONENTS

Models
'09 Venza

INTRODUCTION:







Some 2009 model year Venza vehicles may exhibit a lifting condition of the center speaker cover as shown in the illustration. Perform the following procedure to improve this condition.






APPLICABILITY:

PRODUCTION CHANGE INFORMATION:







This TSB applies to vehicles produced BEFORE the Production Change Effective VIN shown.






WARRANTY INFORMATION:






REQUIRED TOOLS & EQUIPMENT:


NOTE:
Additional SSTs may be ordered by calling SPX/OTC at 1-800-933-8335.

REPAIR PROCEDURE:
1. Verify Complaint Condition.







2. Using a plastic pry tool, disengage the 9 claws and 4 guides and remove the No. 2 instrument panel speaker panel sub-assembly.












3. Apply 2 layers of 0.5 mm felt to the 9 speaker cover claws as shown in the illustration.







4. Engage the 4 guides and 9 claws to install the No. 2 instrument panel speaker panel sub-assembly.
5. Verify the condition is improved.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.