Canada - Interior - Gap Between Upper And Lower Console

Bulletin
TSB3341

Issue Date
December 22, 2009

Market
Canada

Title
RH UPPER TO LOWER CENTER CONSOLE GAP

Component
BODY

Models
'09 Venza

INTRODUCTION:







Some 2009 model year Venza vehicles may exhibit a 2 - 3 mm (0.08 - 0.12 in.) gap between the upper and lower console on the RH side as shown in the illustration. Perform the following procedure to improve this condition.






APPLICABILITY:

PRODUCTION CHANGE INFORMATION:







This TSB applies to vehicles produced BEFORE the Production Change Effective VIN shown.






WARRANTY INFORMATION:

REPAIR PROCEDURE:
1. Verify the gap condition.







2. Remove the No. 2 console box carpet.







3. Loosen the console box assembly bolts.







4. Push the center console forward to close the gap.







5. Tighten the console box assembly bolts.







6. Install the No. 2 console box carpet.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.