Removal

1AR-FE COOLING: THERMOSTAT: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL Removal
4. REMOVE NO. 1 ENGINE UNDER COVER
5. REMOVE NO. 2 ENGINE UNDER COVER
6. DRAIN ENGINE COOLANT Service and Repair
7. REMOVE V-RIBBED BELT
HINT: Removal

8. REMOVE WIRE HARNESS CLAMP BRACKET Removal
9. REMOVE GENERATOR ASSEMBLY Removal
10. DISCONNECT NO. 2 RADIATOR HOSE Removal
11. REMOVE WATER INLET





(a) Remove the 2 nuts and water inlet.
12. REMOVE THERMOSTAT
(a) Remove the thermostat.
(b) Remove the gasket from the thermostat.