Timing Components: Specifications
NO. 1 CHAIN TENSIONER ASSEMBLYInstall a new gasket and the chain tensioner with the 2 bolts.
Torque 10 Nm (102 kgf-cm, 7ft-lbf)
TIMING CHAIN COVER SUB-ASSEMBLY
Temporarily install the timing chain cover with the 17 bolts and 2 nuts.
Bolt Length:
Make sure there is no oil on the bolts. If there is oil on the bolts, clean them before installing them.
Tighten the 17 bolts and 2 nuts in several steps, in the sequence shown in the illustration.
For bolt 1, 2, 3 and 4 - Torque 55 Nm (561 kgf-cm, 41ft-lbf)
Except bolt 1, 2, 3 and 4 - Torque 21 Nm (214 kgf-cm, 15ft-lbf)
CRANKSHAFT PULLEY
Torque 260 Nm (2651 kgf-cm, 192ft-lbf)