Installation

1AR-FE COOLING: WATER PUMP: INSTALLATION

INSTALLATION

1. INSTALL WATER PUMP ASSEMBLY





(a) Install a new gasket and the water pump with the 7 bolts.
Torque: 21 Nm (214 kgf-cm, 15ft-lbf)
2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY Reassembly
3. INSTALL GENERATOR ASSEMBLY Installation
4. INSTALL WIRE HARNESS CLAMP BRACKET Installation
5. INSTALL V-RIBBED BELT
HINT: Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. ADD ENGINE COOLANT Service and Repair
8. INSPECT FOR COOLANT LEAK Testing and Inspection
9. INSTALL COOL AIR INTAKE DUCT SEAL Installation
10. INSTALL NO. 1 ENGINE UNDER COVER
11. INSTALL NO. 2 ENGINE UNDER COVER
12. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation