Reassembly

HEATING / AIR CONDITIONING: CONDENSER: REASSEMBLY

REASSEMBLY

1. INSTALL COOLER DRYER





(a) Using pliers, install a new cooler dryer to the modulator.





(b) Apply sufficient compressor oil to the O-ring and fitting surfaces of the cap.
Compressor oil:
ND-OIL 8 or equivalent





(c) Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.
NOTICE: Keep the O-rings and O-ring fitting surfaces clean from dirt or any foreign objects.

Torque: 2.9 Nm (30 kgf-cm, 26in-lbf)

Text in Illustration