Removal

1AR-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

REMOVAL

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE INLET AIR CLEANER ASSEMBLY Removal
4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal
5. REMOVE AIR FUEL RATIO SENSOR





(a) Disconnect the air fuel ratio sensor connector.
(b) Remove the wire harness clamp.





(c) Using SST, remove the air fuel ratio sensor from the exhaust manifold.
SST: 09224-00010