Installation

AXLE AND DIFFERENTIAL: STEERING KNUCKLE: INSTALLATION

INSTALLATION
HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below is for the LH side.

1. INSTALL STEERING KNUCKLE





(a) Using SST and a press, install a new front axle hub bearing to the steering knuckle.
SST: 09950-60020
09951-00810
SST: 09950-70010
09951-07100
2. INSTALL FRONT DISC BRAKE DUST COVER Installation
3. INSTALL FRONT AXLE HUB SUB-ASSEMBLY Installation
4. INSTALL FRONT AXLE HUB HOLE SNAP RING Installation
5. INSTALL FRONT NO. 1 WHEEL BEARING DUST DEFLECTOR Installation
6. INSTALL FRONT LOWER BALL JOINT Installation
7. INSTALL FRONT AXLE ASSEMBLY
HINT: Refer to the procedures from "Install Front Axle Assembly" Installation.