Installation

MF1A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL TRANSFER ASSEMBLY





(a) Install the transfer assembly to the transaxle assembly with 2 new bolts and the 6 nuts.
Torque: 69 Nm (700 kgf-cm, 51ft-lbf)

NOTICE:
- Install the transfer assembly to the transaxle assembly horizontally.
- Do not touch the transfer assembly oil seals during installation.

2. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 2GR-FE)
3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 1AR-FE) Installation
4. INSTALL FLEXIBLE HOSE BRACKET SUB-ASSEMBLY (for 2GR-FE)
5. INSTALL WIRE HARNESS (for 2GR-FE)
6. INSTALL WIRE HARNESS (for 1AR-FE) Installation
7. INSTALL TRANSFER STIFFENER PLATE RH (for 2GR-FE) Installation
8. INSTALL TRANSFER STIFFENER PLATE RH (for 1AR-FE) Installation
9. INSTALL MANIFOLD STAY (for 2GR-FE) Installation
10. INSTALL STARTER ASSEMBLY (for 2GR-FE) Installation
11. INSTALL STARTER ASSEMBLY (for 1AR-FE) Installation
12. INSTALL FRONT FRAME ASSEMBLY (for 2GR-FE) Installation
13. INSTALL FRONT FRAME ASSEMBLY (for 1AR-FE) Installation
14. INSTALL REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) Installation
15. INSTALL STEERING LINK ASSEMBLY Installation
16. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
17. INSTALL FRONT NO. 1 STABILIZER BRACKET LH Installation
18. INSTALL FRONT NO. 1 STABILIZER BRACKET RH
HINT: Perform the same procedure as for the LH side.

19. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE for 2GR-FE Installation for 1AR-FE