Removal

MF1A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE for 2GR-FE Removal for 1AR-FE
2. REMOVE FRONT NO. 1 STABILIZER BRACKET LH Removal
3. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT: Perform the same procedure as for the LH side.

4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
5. REMOVE STEERING LINK ASSEMBLY Removal
6. REMOVE FRONT FRAME ASSEMBLY (for 2GR-FE) Removal
7. SEPARATE REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) Removal
8. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE) Removal
9. REMOVE STARTER ASSEMBLY (for 2GR-FE) Removal
10. REMOVE STARTER ASSEMBLY (for 1AR-FE) Removal
11. REMOVE MANIFOLD STAY (for 2GR-FE) Removal
12. REMOVE TRANSFER STIFFENER PLATE RH (for 2GR-FE) Removal
13. REMOVE TRANSFER STIFFENER PLATE RH (for 1AR-FE) Removal
14. SEPARATE WIRE HARNESS (for 2GR-FE)
15. SEPARATE WIRE HARNESS (for 1AR-FE) Removal
16. REMOVE FLEXIBLE HOSE BRACKET SUB-ASSEMBLY (for 2GR-FE)
17. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 2GR-FE)
18. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY (for 1AR-FE) Removal
19. REMOVE TRANSFER ASSEMBLY





(a) Remove the 2 bolts and 6 nuts.
(b) Using a plastic hammer, remove the transfer assembly from the transaxle assembly.
NOTICE:
- Remove the transfer assembly from the transaxle assembly without tilting it.
- During removal, do not hold the transfer assembly by the oil seals on either side of the assembly.