Installation

WIPER / WASHER: WASHER MOTOR (for Front Side): INSTALLATION

INSTALLATION

1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY





(a) Install the windshield washer motor and pump assembly.
(b) Connect the connector.
(c) Connect the washer hose.
2. FILL WASHER JAR WITH WASHER FLUID
(a) Fill the washer jar with washer fluid.
3. INSTALL FRONT FENDER LINER RH





(a) Install the front fender liner RH with 3 new grommets and the 8 screws.
(b) Install the bolt and 4 clips.





(c) Install the pin hold clip.

Text in Illustration





NOTICE: Insert the pin hold with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

4. INSTALL FRONT FENDER OUTSIDE MOULDING RH
HINT: Use the same procedure for the RH side and LH side Installation.

5. INSTALL FRONT WHEEL RH