Installation

SEAT: REAR SEAT ASSEMBLY (for RH Side): INSTALLATION

INSTALLATION

1. INSTALL REAR SEAT ASSEMBLY RH
(a) Place the rear seat assembly RH in the cabin.
NOTICE: Be careful not to damage the vehicle body.





(b) Temporarily install the 2 bolts on the front side of the seat.





(c) Temporarily install the 3 bolts on the rear side of the seat.
(d) Install the rear seat assembly RH with the 5 bolts.
Torque: 37 Nm (377 kgf-cm, 27ft-lbf)
2. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY
(a) Connect the rear seat reclining control cable as shown in the illustration.





(b) Connect the rear seat reclining control cable sub-assembly as shown in the illustration.





Text in Illustration









(c) Engage the 2 claws and connect the rear seat reclining control cable sub-assembly as shown in the illustration.
(d) Return the seatback to the upright position.
(e) Pull up the adjuster's lock piece to lock it as shown in the illustration.





Text in Illustration





NOTICE: When pressing the lock piece, make sure the adjuster's spring is not compressed.

3. INSTALL REAR SEAT OUTER TRACK BRACKET COVER





(a) Engage the 3 claws and guide, and install the rear seat outer track bracket cover as shown in the illustration.
4. INSTALL REAR SEAT INNER TRACK BRACKET COVER





(a) Engage the 3 claws and guide, and install the rear seat inner track bracket cover as shown in the illustration.
5. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY





(a) Install the rear seat center headrest assembly as shown in the illustration.
6. INSTALL REAR SEAT HEADREST ASSEMBLY





(a) Install the rear seat headrest assembly as shown in the illustration.