Installation

BRAKE SYSTEM (OTHER): BRAKE PEDAL: INSTALLATION

INSTALLATION

1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY





(a) Install the brake pedal support assembly to the instrument panel reinforcement with the bolt.
Torque: 19 Nm (195 kgf-cm, 14ft-lbf)





(b) Connect the connector.
2. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
3. INSTALL STOP LIGHT SWITCH ASSEMBLY Installation
4. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY (w/ HID Headlight System) Installation
5. INSTALL BRAKE BOOSTER ASSEMBLY
HINT: Refer to the instructions for Installation of the brake booster assembly Installation.