Camshaft Bearing Cap Torque and Sequence

CAMSHAFT BEARING CAP (for Bank 2)





Temporarily tighten the 8 bolts in the order shown in the illustration.

Torque 10 Nm (102 kgf-cm, 7ft-lbf)

CAMSHAFT HOUSING SUB-ASSEMBLY LH





Install the camshaft housing sub-assembly LH and tighten the 13 bolts in the order shown in the illustration.

Torque 28 Nm (286 kgf-cm, 21ft-lbf)





Tighten the 8 bolts in the order shown in the illustration.

Torque 16 Nm (163 kgf-cm, 12ft-lbf)

CAMSHAFT BEARING CAP (for Bank 1)





Temporarily tighten the 8 bearing cap bolts in the order shown in the illustration.

Torque 10 Nm (102 kgf-cm, 7ft-lbf)

CAMSHAFT HOUSING SUB-ASSEMBLY RH





Install the camshaft housing sub-assembly RH and tighten the 12 bolts in the order shown in the illustration.

Torque 28 Nm (286 kgf-cm, 21ft-lbf)





Tighten the 8 bolts in the order shown in the illustration.

Torque 16 Nm (163 kgf-cm, 12ft-lbf)