Installation

LIGHTING (INT): FRONT DOOR COURTESY SWITCH: INSTALLATION

INSTALLATION

1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH





(a) Using "TORX" socket wrench T30, install the front door courtesy light switch with the "TORX" bolt.
Torque: 8.0 Nm (82 kgf-cm, 71in-lbf)
(b) Connect the connector.
2. INSTALL LOWER CENTER PILLAR GARNISH Installation
3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY Installation
4. INSTALL LAP BELT OUTER ANCHOR COVER Installation
5. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP Installation
6. INSTALL REAR DOOR SCUFF PLATE Installation
7. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP Installation
8. INSTALL FRONT DOOR SCUFF PLATE Installation