Installation

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR: INSTALLATION

INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET





(a) Engage the guide.
(b) Install the child restraint seat tether anchor bracket with the bolt.
Torque: 31 Nm (316 kgf-cm, 23ft-lbf)
HINT: Use the same procedure for the other 2 child restraint seat tether anchor brackets.

2. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY Installation
3. INSTALL NO. 1 DECK BOARD Installation
4. INSTALL DECK SIDE TRIM BOX RH Installation
5. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY Installation
6. INSTALL DECK SIDE TRIM BOX LH Installation
7. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY Installation
8. INSTALL DECK BOARD ASSEMBLY Installation